Parts
GPA120T Pump with 10ft cable and Water Sensor for Cascade & Tabletop Fountains *Threaded Plug (Replaces SP160X3ST and GPL120T)
SKU: GPA120T
GPA120T
Regular price
$28.45
Regular price
$0.00
Sale price
$28.45
Couldn't load pickup availability
COMPATIBILITY:
-
This pump is # GPA120T with QC Passed# starting with "GE" (such as GE21, GE22, GE23).
-
This pump replaces pump# SP-160X3ST with QC Passed# starting with "JM" (such as JM19, JM20, JM21, JM22).
-
This pump replaces pump# GPL120T and SP-160X3S with QC Passed# starting with "GE".
NOTE ABOUT PLUG STYLE:
- If your old pump has a threaded plug with 1 center pin then you can order this pump without needing a plug adapter.
-
If your old pump has a push together plug that's not threaded then you have an older version with a discontinued plug style. When you order new pump you will also need to order a plug adapter which is part# PA-10 to be able to connect it to your solar panel. The plug adapter goes in between the plugs and lets you connect a new pump with a threaded style plug to an old panel with a push together style plug.
-
The other option is ordering a solar kit which comes with the pump, solar panel, and tube. Here is a link to the kits so you can order one based on which fountain you have.
Click Here for Solar Kits
PUMP SPECS:
- Internally brushless pump with 10 ft / 120 in / 3m long cable and 3 suction cups
- 4 to 12 volts max, 3.5 watts max, liquid temp 35°C (95°F) max, IP68
- QC Passed number starts with "GE"
- Plug: threaded plug with 1 center pin
- Requires either a solar panel or AC adapter to operate
- Comes with a filter that slides into slot on front cover
- GPA120T replaces SP-160X3S(GE) and GPL120T and SP-160X3ST
- CASCADE: If you need the long rubber hose with foam plug and clips it's part# 2050KIT (sold separately)
- FROG/KOI: If you need the 2 inch plastic tube with tapered rubber stopper it's part# 2130KIT (sold separately)
- For use in these solar fountains with external style solar panels: Cascades on metal stands, Frog/Koi/Bird spouting fountains, SunJet150 (panel is located out of the fountain on the ground, instead of in the fountain under water)
SHIPPING:
-
This item ships via US Postal Service. See exceptions:
If ordering multiple replacement parts and the total weight is over 1 lb then the order may ship via Fed Ex.
If combined with a replacement part that ships via Fed Ex then the whole order will ship via Fed Ex.
If you order a replacement part and a full product they ship from different warehouses so they will ship separately.
Power Source: Solar or Electric
Care Instructions: Remove mesh filter and rinse under water. Remove plastic filter cover, pry off impeller cover, and white impeller. Wipe off magnet on back of impeller and clean down inside pump around silver pin using a q-tip