GPA4T Pump with 4" cable and Auto-off water sensor for Birdbath, 2-Tier, Aquanura *Threaded Plug (Replaces SP-160X01T)

COMPATIBILITY:

• Pump# GPA4T replaces pump# SP-160X01T (for Birdbath fountains, 2-Tier fountains, and Aquanura #21300R01) and pump# NE70X01 (for Aquanura LP #21500R01) which have been discontinued. It's a compatible replacement with the same plug type and has a water sensor so it's also an upgrade.
  
  
• Pump GPA4T is compatible with solar panel model# SB1W1ST, SB1W5DT, SB2W0DT, 21300T, 21500T, 21510T
  
  
• If your solar panel is an old model with a push together plug such as model# SB1W0S, SB1W1S, SB1W5D, SB2W0D, then you will also need to order a Plug Adapter (part# PA-10) with this pump to be able to connect it.
  
  
• If pump model# does not end with T (such as model# 20020P01, SP-160X01, or SP-160X03) then it has a push together plug style and your panel should have the same style plug. When you order new pump# GPA4T you will also need to order a Plug Adapter which is part# PA-10 to be able to connect it to your solar panel. The plug adapter goes in between the plugs and lets you connect a new pump with a threaded style plug to an old panel with a push together style plug.
  
  
• If your old pump model number was SP-160XC3 then it has a built-in splitter with the old push together plug style so you will need a pump (part# GPAT) and a splitter (part# Y-CONNECTOR-T) and 2 plug adapters (part# PA-10). You'll need one for each old solar panel to connect to the new splitter. You can also buy all parts together in a new kit which in simpler and cheaper. It comes with a pump, splitter and 2 panels. Here is a link to the page with the kits: 
  Click Here for Solar Kits

PUMP SPECS:

• Internally brushless motor with 4 inch, 10cm, 0.1m cable
  
• 4 to 12 volts max, 3.5 watts max, liquid temp 35°C (95°F) max, IP68
  
• Auto-on/off water sensor (metal pin on the back of the pump)
• QC Passed number starts with "GE"
• Plug: threaded plug with 1 center pin
• Comes with white impeller, cover, and filter (on the inside)
• Requires either a solar panel or AC adapter to operate
• Comes with a filter that slides into slot on front cover 
• For use in these solar fountains with integrated style solar panels: Birdbaths, 2-Tiers, Umbrella Fountain with Boy & Girl (statues may vary), Urns, Buddha, Aquanura 21300R01, Aquanura LP 21500R01 (panel is located in the fountain under water, instead of out of the fountain on the ground)
• GPA4T replaces pump model SP-160X01T and NE70X01
  
• When replacing older model pumps that had a push-together plug style such as the following model numbers then you will need also need to order a new solar panel so we suggest ordering a kit:
  SP-120X01 (for Angel or St. Francis), SP-160X01 (for birdbaths), SP-160X02, SP-160XC3 (for fountains with 2 solar panels), SP-160X12 (for fountains with 2 solar panels), 20020P01, 20620P01, 20900P01, 20960P01, 20020ELCB, 20020ELCL, 24400P01
  
• Note: When replacing pump #SP160X12T if you want the pump and Y-connector you can order item# GPA12T it will come with both parts
  

SHIPPING:

• This item ships via US Postal Service. See exceptions:
  If ordering multiple replacement parts and the total weight is over 1 lb then the order may ship via Fed Ex.
  If combined with a replacement part that ships via Fed Ex then the whole order will ship via Fed Ex.
  If you order a replacement part and a full product they ship from different warehouses so they will ship separately.