Assembled Dimensions: 4.3” x 4.3” x 11.8” (with base), 59” cable length for charger

Brand: SANI-T by AVIAIR

Toss all your chemical-based cleaners that are less effective away! PURE PRO Electrolysis Deep Cleaning System provides a simpler way to clean with only salt and water. The system initiates an electrochemistry reaction which creates a unique, and highly effective, sanitizing solution of electrolyzed oxidizing water. This solution kills SARS-CoV-2 that causes COVID-19, and other commonly seen bacteria and viruses from surfaces.

Create Solution: add water and salt, plug in unit and wait 6-12 minutes until LED light turns on – indicating electrolyzed oxidizing water is now ready

Electrolyzed Oxidizing Water: sodium hypochlorite, sodium chloride, and hypochlorous acid are the compounds generated during the electrochemistry reaction that effectively kill germs, bacteria and viruses

Kill Germs, Viruses and Bacteria: including SARS-COV-2, environmental bacteria, salmonella, E. Coli, staphylococcus, candida albicans, H1N1 influenza virus, enterovirus, poliovirus and more

Laboratory Tested: in CL3 Lab at University of Birmingham, UK and proven to kill SARS-CoV-2 (which causes COVID-19) in 20 seconds

EPA: Est No. 96558-TWN-1

Environmentally Friendly: reusable bottle generates no plastic waste and no chemical waste

Weight: 1.12lb (with base) 0.65lb (without base)

Capacity: 13.53oz / 400ml

How to Use:

1. Fill your bottle with tap water
2. Add ¼ teaspoon salt and shake well to allow salt to dissolve
3. Plug base into outlet and set bottle on top of base (leave the spray head off)
4. Wait 6-12 minutes until LED lights turn on and electrolysis process is activated
5. Twist sprayer head back on and go clean! Your electrolyzed oxidizing water is ready

Cleaning and Maintenance:

1. Use clean tap water to rinse thoroughly and empty bottle
2. Add 1.7 fluid ounces of vinegar and wait 30 minutes before rinsing thoroughly with water
3. Dry with cloth or soft paper towel, and clean thoroughly before storage

Check Your Solution for Freshness:

1. Open cap and smell the solution. If it is still fresh, you will smell a slight chlorine-like scent.
2. If the solution does not have a scent, then it is time to make a new batch. Follow above “How to Use” steps.