NOTE:
This pump can be used as a substitute for pump# SP-160X01T (for birdbath fountains, 2-tier fountains, Aquanura 21300R01) and NE70X01 (Aquanura LP 21500R01). 

COMPATIBILITY:

• If your old pump is model# SP-160X01T (ends with T) then you can order this pump without needing a plug adapter.
  
  
• Examples of solar panel model numbers that have the new threaded-style plug:
  SF0W6ST, SB1W1ST, SB1W5ST, SB1W5DT, SB2W0DT
  If your solar panel is one of these numbers then no you do not need a plug adapter.
  -----------------------------------------------------------------------------------
  
• If your old pump is model# SP-160X01 (does not end with T) then you have a an older version which has a discontinued plug style. When you order new pump model# SP-160X01T you will also need to order a plug adapter which is part# PA-10 to be able to connect it to your solar panel which would have an older version of the plug. The plug adapter goes in between the plugs and lets you connect a new pump with a threaded style plug to an old panel with a push together style plug.

• Examples of solar panel model numbers that have the discontinued push-together style plug:
  SF0W6S, SB1W1S, SB1W5S, SB1W5D, SB2W0D
  If your solar panel is one of these numbers then yes you will need a plug adapter PA-10 to be able to connect this new pump.
  If you already have a plug adapter from a previous order then you can order just the pump.
  -----------------------------------------------------------------------------------
  
• The other option is ordering both a new pump and new panel in a kit.
  Here are options for kits:
  Kits For 3-Tier Fountains (with solar panel in the top)
  3090PKS-T (standard solar with panel, pump, tube kit)
  3090PKD-T (solar-on-demand with panel, on/off switch, battery, pump, tube kit)
  

PUMP SPECS:

• Internally brushless pump with 12 inch (30cm, 0.3m) wire 
  
• 4 to 12 volts max, 3.5 watts max, liquid temp 35°C (95°F) max, IP68
• Has a threaded style plug
• Comes with impeller, cover, and filter (on the inside)
• Has a 12 inch cable to use with certain pouring/cascading style fountains
• Requires either a solar panel or AC adapter to operate
• For use in these solar fountains with integrated style solar panels:
  Black Square or Grey Round Cascading Pillar Fountains (panel is located in the fountain under water, instead of out of the fountain on the ground)
• For use with solar panels: SB1W5ST, SB2W0DT 
• Replaces pump model #SP-160X03T without any additional parts needed.
• When replacing pump #SP-160X03 you need to also order a Plug Adapter
  

SHIPPING:

• This item ships via US Postal Service. See exceptions:
  If ordering multiple replacement parts and the total weight is over 1 lb then the order may ship via Fed Ex.
  If combined with a replacement part that ships via Fed Ex then the whole order will ship via Fed Ex.
  If you order a replacement part and a full product they ship from different warehouses so they will ship separately.